Main > Chinese Optics Letters >  Volume 5 >  Issue 11 >  Page 642 > Article
  • Abstract
  • Abstract
  • References (7)
  • Cited By (2)
  • Get PDF
  • Paper Information
  • Received: Feb. 26, 2007

    Accepted: --

    Posted: Nov. 14, 2007

    Published Online: Nov. 14, 2007

    The Author Email: Peng Xiao (rocshore@hit.edu.cn)

    DOI:

  • Get Citation
  • Copy Citation Text

    Peng Xiao, Jingmin Dai, Qingwei Wang. Measurement of thermophysical properties by a pulse-heating technique[J]. Chinese Optics Letters, 2007, 5(11): 642

    Download Citation

  • !Citations Alert
  • Share
Chinese Optics Letters, Vol. 5, Issue 11, 642 (2007)

Measurement of thermophysical properties by a pulse-heating technique

Peng Xiao*, Jingmin Dai, and Qingwei Wang

Author Affiliations

  • Department of Automation Measurement and Control, Harbin Institute of Technology, Harbin 150001

Abstract

A technique is described for the dynamic measurement of selected thermophysical properties of electrically conducting solids in the temperature range from 1100 K to the melting point. Based on rapid resistive self-heating of the specimen from room temperature to any desired high temperature in several seconds by the passage of an electical current pulse through it, this technique measures the pertinent quantities such as current, voltage, randiance temperature, with sub-millisecond time resolution. The pulse-heating technique is applied to strip specimens. The radiance temperature is measured by high-speed pyrometry, normal spectral emissivity of the strips is measured by integrating sphere reflectometry. The normal spectral emissivity results are used to compute the true temperature of the specimens. The heat capacity, electrical resistivity, total hemispherical emissivity are evaluated in the temperature range from 1100 K to the melting point.

keywords

Please Enter Your Email: