Main > Chinese Journal of Lasers >  Volume 47 >  Issue 8 >  Page 0801003 > Article
  • Abstract
  • Abstract
  • View Summary
  • Figures (9)
  • Tables (2)
  • Equations (0)
  • References (22)
  • Get PDF(in Chinese)
  • Paper Information
  • Received: Jan. 17, 2020

    Accepted: Apr. 1, 2020

    Posted: Aug. 1, 2020

    Published Online: Aug. 24, 2020

    The Author Email: Deng Ying (tjudengying@sina.com)

    DOI: 10.3788/CJL202047.0801003

  • Get Citation
  • Copy Citation Text

    Chongbing Qu, Minqiang Kang, Xiangjun Xiang, Jianbin Li, Song Zhou, Jiangang Zheng, Qihua Zhu, Ying Deng. Theoretical Study of 4.3 μm Dual-Wavelength Pumped Dy∶InF3 High-Energy Mid-Infrared Fiber Lasers[J]. Chinese Journal of Lasers, 2020, 47(8): 0801003

    Download Citation

  • Category
  • laser devices and laser physics
  • Share
Chinese Journal of Lasers, Vol. 47, Issue 8, 0801003 (2020)

Theoretical Study of 4.3 μm Dual-Wavelength Pumped Dy∶InF3 High-Energy Mid-Infrared Fiber Lasers

Qu Chongbing1,2, Kang Minqiang1,2, Xiang Xiangjun1, Li Jianbin1, Zhou Song1, Zheng Jiangang1, Zhu Qihua1, and Deng Ying1,*

Author Affiliations

  • 1Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang, Sichuan 621900, China
  • 2Graduate School, China Academy of Engineering Physics, Beijing 100088, China

Abstract

4.3 μm mid-infrared fiber lasers are produced by pumping Dy-doped InF3 with dual wavelengths of 1.7 μm and 2.3 μm. The spatial distributions of pump light power, signal light power and population density in the cavity are calculated, and the influences of pump light power, reflectivity of the output mirror, fiber length, and fiber loss on output laser power are numerically analyzed. The calculation results show that the self-termination effect can be effectively eliminated by dual-wavelength pumping, and the 4.3 μm laser output can be realized. The laser output power mainly depends on the power of 2.3 μm pump laser. When the 1.7 μm pump laser power is fixed, the laser output power increases linearly with the increase of the 2.3 μm pump laser power. When the 2.3 μm pump laser power is fixed, the optimal 1.7 μm pump laser power is obtained, which makes the laser output power maximum. The study results provide a feasible scheme for the operation of a 4 μm high-power continuous-wave fiber laser, which is instructive for obtaining 4 μm lasers via dual-wavelength pumped Dy∶InF3 fiber laser.

keywords

Please Enter Your Email: