Main > High Power Laser Science and Engineering >  Volume 7 >  Issue 1 >  Page 010000e4 > Article
  • Abstract
  • Abstract
  • Figures (12)
  • Tables (0)
  • Equations (0)
  • References (42)
  • Get PDF
  • View Full Text
  • Paper Information
  • Received: Aug. 6, 2018

    Accepted: Nov. 13, 2018

    Posted: Feb. 25, 2019

    Published Online: Feb. 25, 2019

    The Author Email: J. Bromage (jbro@lle.rochester.edu)

    DOI: 10.1017/hpl.2018.64

  • Get Citation
  • Copy Citation Text

    J. Bromage, S.-W. Bahk, I. A. Begishev, C. Dorrer, M. J. Guardalben, B. N. Hoffman, J. B. Oliver, R. G. Roides, E. M. Schiesser, M. J. Shoup, M. Spilatro, B. Webb, D. Weiner, J. D. Zuegel. Technology development for ultraintense all-OPCPA systems[J]. High Power Laser Science and Engineering, 2019, 7(1): 010000e4

    Download Citation

  • Special Issue
  • High Energy Density Physics and High Power Lasers 2018
  • Share
High Power Laser Science and Engineering, Vol. 7, Issue 1, 010000e4 (2019)

Technology development for ultraintense all-OPCPA systems 

J. Bromage*, S.-W. Bahk, I. A. Begishev, C. Dorrer, M. J. Guardalben, B. N. Hoffman, J. B. Oliver, R. G. Roides, E. M. Schiesser, M. J. Shoup, M. Spilatro, B. Webb, D. Weiner, and J. D. Zuegel

Author Affiliations

  • Laboratory for Laser Energetics, University of Rochester, Rochester, NY 14623-1299, USA

Abstract

Optical parametric chirped-pulse amplification (OPCPA) [Dubietis et al., Opt. Commun. 88, 437 (1992)] implemented by multikilojoule Nd:glass pump lasers is a promising approach to produce ultraintense pulses (${>}10^{23}~\text{W}/\text{cm}^{2}$). Technologies are being developed to upgrade the OMEGA EP Laser System with the goal to pump an optical parametric amplifier line (EP OPAL) with two of the OMEGA EP beamlines. The resulting ultraintense pulses (1.5 kJ, 20 fs, $10^{24}~\text{W}/\text{cm}^{2}$) would be used jointly with picosecond and nanosecond pulses produced by the other two beamlines. A midscale OPAL pumped by the Multi-Terawatt (MTW) laser is being constructed to produce 7.5-J, 15-fs pulses and demonstrate scalable technologies suitable for the upgrade. MTW OPAL will share a target area with the MTW laser (50 J, 1 to 100 ps), enabling several joint-shot configurations. We report on the status of the MTW OPAL system, and the technology development required for this class of all-OPCPA laser system for ultraintense pulses.

keywords

Please Enter Your Email: